หมวด: องค์กรรัฐและเอกชน(ขาย)
  

Impact modifier, สารต้านทานแรงกระแทก, อิมแพ็คโมดิไฟเออร์, CPE135, CPE135A, MBS

รายละเอียด:

ผลิตนำเข้าและจำหน่าย Impact modifier, สารต้านทานแรงกระแทก, อิมแพ็คโมดิไฟเออร์, CPE135, CPE135A, MBS สอบถามข้อมูลเพิ่มเติมได้ที่ ฝ่ายขาย บริษัท ไทยโพลีเคมิคอล จำกัด โทรศัพท์ 034854888, 034496284 มือถือ 0824504888, 0800160016 โทรสาร 034854899, 034496285

คลอริเนตเต็ตโพลีเอทิลีน, สารต้านทานแรงกระแทก, Chlorinated Polyethylene, CPE, Impact modifier

Chlorinated polyethylene (CPE) modifiers provide excellent impact resistance and ductility to the entire range of rigid PVC applications, including vinyl siding, fence, window profiles, and pipe. The range of use extends to PVC cap stocks, based on proven weatherability of CPE-modified compounds. Specialized CPE grades provide enhanced efficiency with an excellent combination of processing characteristics.

Vinyl Siding:
CPE is the modifier of choice for cost/performance efficiency in vinyl siding substrate, providing toughness at low temperatures, ductility, and a high capability for filler acceptance. Good weatherability for CPE-modified compounds extends the range of application to the siding capstock.
Fence/Deck:
CPE provides excellent impact properties, filler acceptance, and ductility in vinyl fence substrate, and can also be utilized in capstock applications.
Window Profiles:
CPE is used extensively, alone or in blends with acrylic impact modifiers, to achieve a desirable combination of ductile impact and processing performance. CPE-modified profiles are characterized by improved low temperature properties and corner-weld strength
Pipe:
CPE finds use in pipe applications, typically in specialty PVC pipe, CPVC pipe, electrical conduit, and any highly-filled compounds in this category.

Chlorinated Polyethylene (CPE for plastic)

Properties:
Chlorinated Polyethylene CPE-135A is a plastic rigid product modifier to achieve better plastification and anti-agglomeration performance. However, Chlorinated Polyethylene CPE-135A is no longer suitable for soft products and rubber application.
Other Names: Chlorinated Polyethylene(CPE)
MF: [ CH2-CHCl-CH2-CH2 ]n
Purity (%): 99% min
Usage: Plastic Auxiliary Agents, Rubber Auxiliary Agents, Leather Auxiliary Agents
Brand Name: BFDS
Product Description
Properties:

It has fine multiple physical property with good low-temperature flexibility and better
Tearing strength. Its dissolved parameter are nearly same as PVC and it hasgood affinity
With PVC. Under the condition of right processing, it can form a network composition
Inside of the hard PVC finish products and give them good normal, low-temperature
Flexibility and impact strength.
Usage:
When used with plastics, it acts as modifier. CPE is mainly used as impact modifier in
UPVC products, to improve impact strength and low-temperature property. As modifier.
CPE could be used with rubber to improve itsproperties, such as anti-combustion, insulation
And anti-ageing. Moreover, it can be an addictive for ABS to improve the flame retardant.
Specifications:
Appearance: White powder
Chlorine contant, %: 34-36
Thermal Decomposition TemperatureMoisture, ° C: 165min
Bulk Density, g/ml: 0.5max
Volatile Content, %: 0.4max
Particle Size(36 mesh passing percentage), %: 99
Shore Hardness, A: 65min
Tensile Strength, MP: 6.0min

Most polymers have to be impact modified in order to satisfy end-use requirements for rigid applications. In all cases, the problem can be solved by incorporating rubber domains into the polymer matrix. However, the nature and the size of the elastomeric phase have to be adapted to each polymer matrix. In most cases, it is also desirable to use the minimum amount of rubber modifier. Among the families of plastic toughners, MBS and ABS impact modifier can be used to improve impact strength.

It has fine multiple physical property with good lowtemperature flexibility and better tearing strength.
Its dissolved parameter are nearly same as PVC and it has good affinity with PVC. Under the
condition of right processing, it can form a network composition inside of the hard PVC finish
products and give them good normal, low-temperature flexibility and impact strength.

Mainly used for producing PVC profiles, PVC pipe & fitting, cold curved
pipe line, PVC sheet, PVC blowing board and PVC extrusion board.

สอบถามข้อมูลเพิ่มเติมได้ที่ ฝ่ายขาย
Thai Poly Chemicals Co., Ltd.
บริษัท ไทยโพลีเคมิคอล จำกัด
ที่อยู่36/5 ม.9 แขวง/ตำบลนาดี เขต/อำเภอเมืองสมุทรสาคร จังหวัดสมุทรสาคร รหัสไปรษณีย์74000
Tel.: 034854888, 034496284
Fax.: 034854899, 034496285
Mobile: 0824504888, 0800160016
Website : www.thaipolychemicals.com
Email1 : thaipolychemicals@hotmail.com
Email2 : info@thaipolychemicals.com


ภาพที่เกี่ยวข้อง

Impact modifier
*คลิกที่ภาพเพื่อดูภาพขนาดจริง
แท็ก(คำค้น): Impact modifier   สารต้านทานแรงกระแทก   อิมแพ็คโมดิไฟเออร์   CPE135   CPE135A   MBS  
สภาพสินค้า: ใหม่ | ราคา: 1 บาท | เว็บไซต์ที่เกี่ยวข้อง: http://www.thaipolychemicals.com

ข้อมูลเจ้าของประกาศ

ชื่อ: thailandchemicals เบอร์โทรศัพท์: 034496284
อีเมล์: thaipolychemicals@hotmail.com โทรศัพท์มือถือ: 0800160016
สถานที่ติดต่อ: 36/5 Moo 9 Nadee, Mueangsamutsakhon, Samutsakhon จังหวัด: สมุทรสาคร
วันที่่ลงประกาศ: 7 ตุลาคม 2556 วันประกาศหมดอายุ: 26 กุมภาพันธ์ 2558
อ่าน: 424 | ตอบ: 0 IP: 101.109.109.xxx
 
แก้ไขประกาศ  แจ้งลบประกาศ   ต่ออายุประกาศ
[แสดงความคิดเห็นต่อประกาศนี้]
ชุบกัลวาไนซ์
ความคิดเห็น
ชื่อ-นามสกุล:
อีเมล์:
ความคิดเห็น:

Reload Image
รหัสยืนยัน:
*กรอกรหัสยืนยันตามภาพด้านบน
 
  ลงประกาศฟรี   © 2009 Thaicenterway.com